Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Fast, Reliable Garage Door Repair Across Kirby
Garage door repair in Kirby typically runs $150-$600, and most calls are completed in a single visit because our trucks carry springs, cables, openers, and hardware for the older doors common here. If your door is stuck, noisy, or won’t close, call (830) 224-4217. A live person answers, day or night.
We know Kirby. The city is barely two square miles, fully surrounded by San Antonio, with its own permitting authority and a housing stock built mostly between 1950 and 1975. Those original single-car garages with 7-foot headroom and narrow 8- to 9-foot openings are still in daily use. We’ve repaired doors on Alpine Drive, replaced weather-beaten panels near Kirby Middle School, and realigned tracks on homes off FM 78. Our crews dispatch from the San Antonio office and carry parts sized for these older systems, not just the 16-foot double-car setups found in newer subdivisions.
Why Mainspring Garage Door Co. Is Kirby’s Preferred Garage Door Repair Company
We’ve been serving this region since 1984. That’s 42 years of working on the exact door types Kirby homeowners live with: steel sectionals from the 1960s, hollow-core wood doors from the 1950s, and early chain-drive openers that are now well past their design life. Our technicians are trained journeymen, background-checked and uniformed, working under our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it.
Kirby residents call us because we quote the flat price before touching a wrench. No surprises on the bill. Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, we come back. No paperwork battle, no dispute line.
Our phones are staffed by a live person 24/7, including holidays. Most Kirby calls are same-day or next-day. We don’t use answering services or phone trees.
We also understand what other crews miss. Kirby runs its own permits, separate from San Antonio and Bexar County. Replacement doors and motor installations need Kirby city permits that contractors licensed only for San Antonio routinely overlook. We pull them. You don’t get red-flagged at inspection.
Our Garage Door Repair Services in Kirby
Spring Repair in Kirby
Broken springs are the most common call we get in Kirby, especially after a hard freeze. The February 2021 cold snap snapped torsion springs across the San Antonio basin at rates far above what North Texas sees, because rapid temperature swings stress the metal more than sustained cold. Most Kirby homes still run original or second-generation springs on single-car doors, and those springs are simply out of cycles.
A spring repair in Kirby runs $180-$340. We match the wire size, inside diameter, and length to your door’s weight, not just what’s on the truck. On masonry-above-opening homes, we drill and set masonry anchors for end bearing plates instead of relying on wood lags that won’t bite. The door gets rebalanced. The opener rail gets verified. Done right.

Panel Replacement
South- and west-facing garage doors in Kirby take a beating. The San Antonio basin heat regularly hits 100°F+ from June through September, and UV degradation chalks paint and cracks bottom seals on doors that were never designed for that exposure. We’ve replaced panels on homes near FM 78 where the original steel had thinned and the R-value was effectively gone.
Panel replacement in Kirby costs $250-$500 per panel, depending on gauge, insulation, and whether the section is still manufactured. For doors past their service life, we’ll tell you straight: a full replacement is the better spend. We quote both options. You decide.

Track Realignment
Bent or misaligned tracks cause doors to bind, jump rollers, or reverse unexpectedly. In Kirby, we see this after DIY attempts, vehicle bumps, or because prior crews used standard hardware on masonry-framed openings. The track brackets loosen. The verticals drift. The door starts catching at the header.
Track realignment in Kirby runs $120-$240. We check plumb, level, and bracket anchoring. On masonry-above-opening homes, we use proper masonry anchors, not wood lags stripped into crumbling mortar. The door should run quiet and true when we’re done.

Cable Repair
Cables jump drums or fray when springs fail out of balance, or when end bearing plates work loose. In Kirby, we’ve found cables off the drum because a previous installer used wood-lag mounts in masonry that couldn’t hold torque. We fix the root cause, not just the symptom. Cable repair: $130-$250.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kirby
We stock parts and are factory-familiar with LiftMaster, Chamberlain, Genie, and Clopay systems. Most Kirby calls involve legacy openers and doors, but we also install current models when replacement makes sense. Our trucks carry common spring sizes for 8-foot and 9-foot single-car doors, the standard in Kirby’s older neighborhoods, so we don’t waste your time ordering parts. For brands we don’t stock locally, we source within 24 hours and schedule return installation. No deposit games. No waiting weeks.
Common Garage Door Repair Problems We See in Kirby Homes
- Freeze-snapped legacy springs. Original torsion springs from the 1950s-70s have no cycles left. A hard freeze finishes them. We replace with correctly sized springs and rebalance the door so the opener isn’t doing the spring’s job.
- UV-degraded panels and seals. South- and west-facing doors in Kirby chalk, crack, and lose insulation value. Homeowners feel it in the garage temperature and see it in rising cooling bills. We assess whether panel replacement or full door replacement is the square deal.
- Masonry-mounted hardware failures. Prior crews unfamiliar with Kirby’s load-bearing masonry above garage openings use standard wood-lag spring mounts. The lags strip. The bearing plates work loose. Cables jump drums. We anchor properly with masonry bolts and expansion anchors.
- Opener strain misdiagnosed as motor failure. Aging springs lose tension. The opener strains, overheats, or reverses. Homeowners buy new openers when the real fix is springs, cables, and rollers restored to proper balance. We test door weight before quoting any opener work.
Pricing for Garage Door Repair in Kirby, TX
We state the flat price before any work begins. No surprises on the bill. Below are the ranges we see for typical Kirby repairs, based on single-car and narrow double-car doors common in the city’s 1950s-1970s housing stock.
| Service | Price Range in Kirby |
|---|---|
| Spring Repair | $180-$340 |
| Cable Repair | $130-$250 |
| Panel Replacement | $250-$500 |
| Track Realignment | $120-$240 |
| Roller Replacement | $110-$220 |
| Opener Repair | $120-$320 |
| Opener Installation | $250-$550 |
| New Door Installation | $700-$2,200 |
Factors that move the needle: door size (Kirby’s 8-foot and 9-foot openings cost less than 16-foot doubles), hardware condition (masonry anchors add labor versus standard wood-lag mounts), and whether the door is still manufactured (discontinued panels may require full replacement). We offer free written estimates. Our $50 Off Any Repair Over $250 applies, and seniors and veterans receive a standing 5% discount.
We Also Serve Cities Near Kirby
Our Garage Door Repair crews work throughout the San Antonio metro, including Kirby, Shavano Park, Cross Mountain, San Antonio, and Hill Country Village. Same live-answer phone, same 90-Day Done Right Promise, same upfront pricing. Dispatch and scheduling are coordinated from our San Antonio office.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Repair in Kirby
Yes. Kirby maintains its own municipal permitting authority separate from San Antonio and Bexar County, and garage door replacements and motor installations require a Kirby city permit. We pull the permit as part of our standard replacement process. Contractors licensed only for San Antonio often overlook this, leaving homeowners with unpermitted work. Call (830) 224-4217 and we’ll confirm permit status on your project before we start.
The springs have likely lost tension or a cable has frayed, shifting the door’s weight onto the opener motor. In Kirby’s 1950s-1970s homes, original springs are well past their cycle life. We test door balance first. If the door is heavy by hand, the fix is springs, cables, and rollers - not a new opener. A proper spring repair runs $180-$340 and saves the cost of an unnecessary opener replacement.
A broken spring is repaired by replacement, not welding or patching. We install a new matched spring set and rebalance the door. Whether the door itself needs replacing depends on panel condition, hardware availability, and whether the door is still manufactured. For Kirby’s common 8-foot and 9-foot single-car doors, parts are often still available. If panels are UV-degraded or the door is obsolete, we’ll quote both repair and replacement so you can choose the square deal.
Yes. Load-bearing masonry above the opening means no wood header to lag into. Standard wood-lag spring mounts will strip and loosen. We drill the masonry, set expansion anchors, and mount end bearing plates with proper masonry bolts. This takes longer than a standard install but holds torque correctly. We’ve done this on homes across Kirby, including a west-facing single-car garage off Alpine Drive where prior crews had used wood lags that failed within a year.
Most Kirby single-car openings are 8-9 feet wide, too narrow for modern trucks and SUVs. Widening requires structural header work, potential electrical relocation, and Kirby city permits - a significant project. If your current door functions and fits your vehicles, replacement with a properly insulated modern door is usually the practical choice. If you need width for a full-size truck, we measure, assess the masonry or framing above the opening, and quote both options honestly. Free estimates: (830) 224-4217.
Call Mainspring Garage Door Co. at (830) 224-4217 for a free estimate on garage door repair in Kirby. A live person answers, 24/7. We quote the flat price before any work begins, back every job with our 90-Day Done Right Promise in writing, and carry the parts to finish most calls in a single visit.
Written by Carl Dutton, Owner at Mainspring Garage Door Co., serving Kirby and surrounding communities since 1984.




Before
After
Before
After
Before
After